如今，桦木胶合板这一板材在生活中各行业的应用已是十分的广泛，且桦木胶合板出现开胶现象属于正常现象，毕竟胶合板是多张单板胶合在一起形成的，则开胶也是在所难免的。因此应正找寻胶合板开胶的原因，进而采取正确的方法对其进行解决。
桦木胶合板厂家了解到，造成胶合板开胶的原因主要有胶黏剂的质量不好，如变质、水分过多，单板含水率过高，表面质量差；胶合条件没有控制好，如热压温度低或部分温度不均匀，压力不足，热压时间过短而使胶层没有充分固化；陈化时间不足或过长也会使胶着力下降。
Plywood manufacturers have learned that the main reasons for plywood opening are the poor quality of the adhesive, such as deterioration, excessive moisture, high moisture content of the veneer, and poor surface quality; the gluing conditions are not well controlled, such as low heat pressing temperature or Part of the temperature is uneven, the pressure is insufficient, and the hot pressing time is too short, so that the adhesive layer is not fully cured; insufficient or too long aging time will also reduce the adhesive force.

当然已经查询到导致桦木胶合板出现问题的原因，则需要做的就是采取正确的方法进行解决。
a.更换胶黏剂，选用含水量少的配方或适当添加面粉、豆粉以吸收水分；
b可改善单板质量，严格控制单板含水率；调整桦木胶合板热压工艺，提高热压温度，延长热压时间，适当增加压力；
c.定期检查设备，保证旋切机精度，检查热压板蒸汽通路及供汽情况。总之，胶桦木胶合板板材在进行应用的过程中需掌握正确的方式方法，遵循一定的常识要点，保证运用后的突出效果。
Of course, the reason for the plywood problem has been inquired, and what needs to be done is to take the correct method to solve it.
a. Change the adhesive, choose a formula with less water content or add flour and soybean flour to absorb water;
b can improve the quality of the veneer, strictly control the moisture content of the veneer; adjust the hot pressing process, increase the hot pressing temperature, extend the hot pressing time, and appropriately increase the pressure;
c. Check the equipment regularly to ensure the precision of the rotary cutting machine, and check the steam path and steam supply of the hot plate. In short, in the process of application of plywood panels, you need to master the correct methods and follow certain common sense points to ensure outstanding effects after use.(桦木胶合板)